The answer is “YES”! Our specific blend of essential oils rapidly effect a 100% remediation on the entire spectrum of toxic mould. There are many university testing reports on this specific blend of essential oils out there that fully support the results of this specific report, this is the basis on which we created our formulation.

A vital part of our service is to carefully assess and advise you, as to what is actually causingthe mould infestation. As part of our onsite service, we provide advice as to the appropriate measures that should be taken, outside the scope of our service capacities to remedy the causes of mould.

We endeavour to keep our service fees as affordable as possible for our clients. To gain a rapid estimation of costs for your requirements please give us a call and once we have an idea of your specific needs we will be able to immediately provide you with an accurate idea of the costs of service.

You may already be aware that essential oils are commonly diffused using essential oils burners and diffusers, once we apply our essential oil powered mould treatments onto the surfaces within your home, these surfaces actually,the nact as essential oil diffusers in their own right. This vapour assists in dealing with the air born toxic mould.

This vapor phase activity also acts as a brilliant deodoriser, removing that unpleasant musty mould and mildew odour. You may elect to purchase a bottle of the Essential Shield oil for on-going use in your home.

Our services address internal ceilings, walls fixtures and fittings, floor coverings and rugs, furniture and curtains (please note, we do not offer curtain washing and laundering, only the application of mould remediation treatments).

We also deal with all external building surfaces, drive ways and paths, garden retaining walls and so on.

In many cases, mould found on ceilings, is due to water ingress into the roof void. This is normally due to a failure in guttering or roofing or a pipe leak. In some cases, internal roof voids condensate during evening hours, as the day sets in this condensation finds it’s way down onto ceiling surfaces. A good sign that this is happening is when mould ingress is found around the edges of ceiling surfaces.

In such circumstances we usually recommend that the internal roof void be fogged with the Essential Shield fogging treatment. This remediates both the mould on the roof void surfaces and air borne mould. A service can be tailored to deal with almost any mould treatment, removal and ongoing defence requirement you may have.

In most cases No, the treatments we employ present no dangers to you or your family. The manner, in which we apply our products does not, in most cases, require product spraying inside the home and as such we do not need to tarp up or have furniture moved out. We create minimal disruption in the home!

The Essential Shield surface treatment leaves a totally natural, coconut based, micro fine, non-visible, moisture retardant coating on the treated surfaces. This micro fine defensive coating assists in retarding the return of mould. As to how long the Essential Shield treatments will last, this is as variable as the wide diversity of properties, the environments they are located in, and their current and ongoing state of repair!

In short, we have properties that we have treated well over 12 months ago with no return of the mould. The bottom line is that we fully back our work and products. If there is a “reasonably based” issue with the works, we have undertaken for a client within the first 6 months we will return and deal with it.

Again, the answer is NO. In fact, this was one of the questions we had while the products were being developed. We have applied the product on a wide range of plants and lawns and have never experienced any adverse effects on the same.

Likewise, the ingredient’s in the products pose no threat of run off to natural water ways. Another important question we get from time to time, is the products potential impact on envirobased-sewage systems.

To date we have not experienced any adverse impacts on these systems, but if you do have such a system, we elect to alter our works procedures to ensure that residual product is not directly imposed on such systems to start with.